Congratulations on the purchase of your Fisher™ Audio and WiFi Kit.
Your new sound system and SmartLink™ WiFi kit will have you enjoying the ultimate in-spa experience.
The SmartLink™ WiFi module and SpaLink™ app allow you to connect and take control of your spa
remotely from any location at any time using a smart, android or iOS device.
Using the SpaLink™ app, your device becomes a mobile, wireless remote for your spa enabling complete control of all settings and accessories including pumps, blowers and LED lights.
The wireless Hydravibe™ stereo allows you to connect through your Bluetooth® device and stream your favourite tunes with ease. Great choice including the subwoofer; this upgrade will have you listening to your favourite playlist, podcast, radio channel or audiobook in complete clarity.
In this guide, you will find out how to install your Fisher™ Audio and WiFi Kit so that you can get back to enjoying what really matters - relaxing in your spa!
Sincerely,
Adam Fisher
Founder of Fisher Spas™
Installation Instructions
Safety and Warnings
- When installing and using this electrical equipment, basic safety precautions should be followed.
- To reduce the risk of injury, do not permit children to install this product.
- Disconnect power to the spa before removing any cabinet panels.
What's included in your kit:
- Screws
- Transformer
- Hydravibe™ Stereo
- Hydravibe™ Power button
- Hydravibe™ Subwoofer
- SmartLINK™ WiFi
Tools Required
- Battery-powered screwdriver
- Phillips screwdriver
Step 1. Remove the cabinet panel to access the equipment bay
Locate the digital touch panel and remove the screws on the cabinet panel directly below the keypad to access the equipment bay.
Step 2. Find the black box where you will mount the stereo and transformer
You will notice that the block box already contains the Ozone generator as pictured below.
Step 3. Install the components into the black box
Use the included screws to mount the included Hydravibe™ Power Supply and Stereo like this:
Step 4. Find the subwoofer mounting base
The subwoofer mounting location is different for each spa. Please click here or scroll to the bottom of this article for the drawings showing the location of the sub speaker mounting location for each model.
Step 5. Secure the subwoofer by using the included straps and screws provided
Connect the speaker wires to the subwoofer.
Step 6. Add on/off button
Locate and remove plug in the cabinet panel
Insert the button through the hole
Attach button to stereo - see step 7.
Step 7. Connect all of the components
Depending on the model you may only have two speakers.
Step 8. Install the SpaNet™ SmartLink™ module
We recommend installing the SmartLink™ module on the outside of the spa on the side of the spa nearest to your wireless router. Then connect the cable from the SmartLink™ Module to the SV Mini controller.
Click here for the detailed instructions.
Step 9. Pair the Hydravibe™ Stereo unit your BlueTooth device.
Follow the instructions on your smart device to pair to the BlueTooth device.
- Select Bluetooth device name "SPA" from your smart device Bluetooth menu.
- Input Bluetooth connection PIN code "5188" when prompted.
Comments
Please sign in to leave a comment.