How do I change over from Chlorine or BioGuard Armour to a Chlorine Free Sanitiser?

We recommend changing your water if it is over two months old before starting the change over process.  If your water is under two months old all you need  to do is follow the instructions below.


Step 1. Clear the water

Water as supplied by the water authorities has chlorine included and so this needs to be eliminated if we are to have a chlorine free spa. Simply use Poppits Quick Fix at the rate of 60 grams per 1000 litres of spa water and filter for 4 hours. This will oxidize the chlorine and any other unwanted matter in the water.

Rain water and bore water also needs to be treated.

Step 2. Balance the water

Using a water test kit or test strip, check the pH, alkalinity and calcium hardness levels of the water.

The pH should be around 7.4 – 7.6 to be comfortable for people with sensitive skin. Total alkalinity should be between 80 – 120pp. If necessary, adjust these two levels using Poppits Water Balance to increase the level or Poppit pH decreaser to reduce them.

Calcium levels that are lower than 100ppm can be damaging to equipment, as well as making it difficult to maintain pH levels and ultimately cause the water to go cloudy.

Rain water is predictably low in calcium. Ideal levels for calcium hardness are between 100 and 200 ppm. To increase calcium levels use spa calcium increaser as per label directions.

Step 3. Sanitize the water

The water is now clear of contaminants and balanced, all that needs to be done is to sanitize the water with a Hydrogen Peroxide Sanitiser , bactericide and clarifier at the rate of one litre per 1000 litres of spa water.

NOTE: If you require further assistance please contact our customer support team via online chat.

Was this article helpful?
2 out of 2 found this helpful
Have more questions? Submit a request



Article is closed for comments.