Why is my power bill so high when I have a heat pump to heat my spa?

  1. Please check the settings on your controller by pressing the up and down arrow together. (This could mean your heat pump and internal heater are both being used).
  2. Scroll through the menu until you reach H.ELE. =ON. This means both the heat pump and the internal heating element will be working at the same time.
  3. To use only the heat pump select H.ELE. OFF = Heat pump ONLY. This means your spa will only heat using the heat pump.

Please refer to page 23 of the attached SpaNet user guide.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.