Why is my Hot Springs spa not heating?

Problem: Spa does not heat; jets and light operate (green logo "Ready", and Blue logo "Power" indicators are blinking)

Possible Causes:

• Integrated pressure switch open - check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Contact our customer service team for a service if the heater trips frequently.

• Circulation pump thermal cut-off tripped - check for clogged filters or air locks in plumbing. Disconnect power to the spa, allow circulation pump to cool. Circulation pump thermal cut-off will reset when pump has cooled and power is reapplied. Contact our customer service team for service if circulation pump thermal cut-off trips frequently.

NOTE: For more troubleshooting information please review the Hot Springs Owner Manual.

Was this article helpful?
4 out of 5 found this helpful
Have more questions? Submit a request



Please sign in to leave a comment.