Jacuzzi® J-200 SERIES, drain valve, instructions below

 
Procedure as follows
1.Locate drain valve plug in cabinet panel and remove it
mceclip1.png
 
2.Remove front cabinet panel (under touchpad) by unscrewing and remooving the top rail and 1 x corner slat, cabinet panel can now be lifted out 
mceclip2.png
mceclip3.png
 
 
3.locate the drain valve inside the cabinet
mceclip4.png
4.remove the valve from the hose
mceclip5.png
 
5.remove the locking ring at rear of valve and insert the drain valve through the side cabinet panel where the plug was removed
mceclip6.png
mceclip7.png
 
6.screw the locking ring back on and hand tighten
mceclip8.png
7.push the hose back all the way up onto the barb at the back of the valve and move the hose clamp up over the hose and barbed section
mceclip9.png
 
8. Reinstall panels 
 
Spa World FAQs Download Button Sm.png
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.