How do I resolve the Error Sn on Balboa MVP260 touchpad?


Cause: If the SnS or Sn Message is Alternating with the Water Temperature on the Display, it is a Possible Sensors Out of Sync Message.

SnS or Sn is Alternating with Temp:
Possibly the "Sensors are out of Sync" (SnS or Sn) with Each Other. With the the Pump ON, prior to Heater ON, the Sensors differ by more than 2°F (1.0°C), indicating one or both Sensors are several degrees off. The Sensors are Possibly Out of Sync with Each Other, or Not Indicating Close to the Same Temperature at Both Sensors. Monitoring the Sensors will Continue for 1 Hour. Contact your Dealer or Service Organization.

Cause: If the SnS or Sn Message is Blinking or Flashing OFF and ON without showing Water Temperature, it is a Verified Sensors Out of Sync Message.


SnS or Sn is Blinking ON and OFF:
There is a Verified "Sensors out of Sync" (SnS or Sn) with Each Other Condition. The "SnS", "Sn", or "SENSOR SYNC" Fault has occurred for more than 1 hour, indicating one or both Sensors are several degrees off, and Spa Functions are Disabled. The Sensors are Verified Out of Sync with Each Other, or Not Indicating Close to the Same Temperature at Both Sensors. Contact your Dealer or Service Organization.

NOTE: If the problem persists please  contact our customer service team via our online chat function.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.